Oticon Genie 2: Enjoy intuitive fitting for individual needs

Summary

Oticon describes the clinician controls for enabling Auracast in Genie 2 and its in-clinic firmware updating tools.

Key findings

• The Auracast broadcast adjustments panel says hearing care professionals can disable or enable Auracast in Accessories, or through Buttons and taps under Controls in Genie 2.
• The panel applies from Intent miniRITE R with firmware 1.3.0 and Intent miniBTE R onwards.
• The Firmware Updater section describes on-the-spot updates to hearing aids and accessories without sending them for service. For wireless hearing aids from More onwards, it names Noahlink Wireless or Noahlink Wireless 2 for firmware updates.
• It asks professionals to install the latest Genie 2 version because new hearing aids may contain firmware incompatible with older installations.

Limits

Undated manufacturer guidance, read on 13 October 2026. The Auracast panel was read from the server-provided content embedded in the directly fetched HTML. It gives no default enabled state, numerical stream-to-microphone mix, or evidence about how often clinicians check these settings.

Read the original

www.oticon.com/professionals/clinical-experience/genie-2

Link checked 13 October 2026. We link to the original and do not host copies.

Cited in

• Are hearing aids set up well enough to use Auracast in venues?Partly answered

Cite this source

The original gives no date, so the citation says “n.d.”. The accessed date is when this library last checked the link; use the date you read it. To point readers to this summary instead, link to https://assistivelisteningknowledgebase.org/evidence/oticon-genie2-auracast-settings/

Every finding here cites its source, and who funded each source is labelled. This site does not recommend products. Found an error or a missing study? Suggest a correction.