ListenWIFI 4 Channel Wi-Fi Audio Server (NEW)

Summary

The maker lists audio specifications and network data requirements for its LW-215-04 ListenWIFI server.

Key findings

• Lists system frequency response as 20 Hz-20 kHz ±1 dB, total harmonic distortion below 1% and signal-to-noise ratio above 74 dB, each at nominal level.
• Lists 16-bit, 48 kHz sampling and 125 kbps of audio bandwidth per listening device, with unicast RTP, UDP and HTTPS transport protocols.
• The page does not identify the live audio codec or explain whether the stated 125 kbps includes packet overhead.
• Lists system delay as 40-60 ms depending on network, traffic, quality-of-service settings and listening device.

Limits

Manufacturer specifications without independent measurements, a named test receiver or headphones, or full test conditions. The network data figure does not establish an encoded codec payload rate. Page undated; read on 13 October 2026.

Read the original

www.listentech.com/shop/product/listenwifi-4-channel-wi-fi-audio-server-new

Link checked 13 October 2026. We link to the original and do not host copies.

Cited in

• How good is the sound each system delivers: bandwidth, codecs and speech understanding?Partly answered

Cite this source

The original gives no date, so the citation says “n.d.”. The accessed date is when this library last checked the link; use the date you read it. To point readers to this summary instead, link to https://assistivelisteningknowledgebase.org/evidence/listen-listenwifi-server-audio-spec/

Every finding here cites its source, and who funded each source is labelled. This site does not recommend products. Found an error or a missing study? Suggest a correction.